CJX2-Z series DC operated AC contactor(hereinafter to be referred as contactor), it mainly applies to the circuit of AC 50Hz/60Hz, and rated insulation voltage 690V. When used in AC-3, and rated operational voltage 380V, rated current up to 95A, for long distance breaking circuit and frequently starting or control the motor. It can be also cimbined with the auxiliary contact block, time-delay block, thermal overload relay devices etc.
This product conforms to GB 14048.4,IEC60947-4-1 standard.
NORMALAUNNING AND INSTALLATION CONDITIONS
•Ambient air temperature:-5℃~+40℃, the average value should not exceed+35℃ within 24 hours.
•Elevation:at most 2000m.
•Atmospheric conditions:When the temperature at 40, the relative humidity of atomsphere should be at the most 50%. When at relatively low temperatures, it could have higher relative humidity. Monthly maximum relative humidity could be not more than 90% . Special measures should be taken due to occurrence of dews.
•Class of pollution:Class 3
•Installation category: III
•Installation conditions:Degree of inclination between fitting surface and vertical surface should not exceed I
•Impact shock:Product should be installed and used in the place where often shakes and impacts.
MODE AND MEANING
OVERALL AND MOUNTING DIMENSIONS
Note: not only use screw mounting,but aslo can use 35mm international standard Din-rail mounting
Quality management is the wings of DAQUAN and is the primer life power of DAQCN brand. The company , which completely carries out quality management ,has passed International Quality System Attestation ISO9001 and CE.
Strict quality testing procedures ,Advanced testing equipment and highly trained quality control personnel , Guarantee Filmography "products manufactures pass rate 100%" of the quality objectives.